Electrical engineering

ANALOG DISCOVERY 2

PASCO CASTLE Kit

CASTLE Kit

PASCO CASTLE Kit

Economy CASTLE Kit

ANALOG DISCOVERY 2

0 out of 5
(0)
SKU: NI_ANALOG_DISCOVERY_2

Analog Discovery 2 transforms any PC into an electrical engineering workstation. This USB-powered device enables students to build and test analog and digital circuits in any environment with the functionality of traditional benchtop instruments.

Compare
PASCO CASTLE Kit

CASTLE Kit

0 out of 5
(0)
SKU: EM-8624A

Kit for two students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

Compare
PASCO CASTLE Kit

Economy CASTLE Kit

0 out of 5
(0)
SKU: EM-8654

Kit for eight students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

Compare

NI ELVIS Engineering Lab Workstation

0 out of 5
(0)
SKU: 785578-20

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a modular engineering educational laboratory platform.

• Seven hardware instruments plus control I/O containing 16 AI, 4 AO, and 40 DIO
• 4-channel, 100 MS/s oscilloscope sample rate with 14-bit resolution and 50 MHz bandwidth
• 16-channel, 100 MS/s logic analyzer/pattern generator
• 16-channel, 1 MS/s analog input with 16-bit resolution
• 40 DIO lines individually programmable as input, output, PWM, or digital protocols

 

Compare

TETRIX PRIME plus myRIO

0 out of 5
(0)
SKU: NI_Tetrix_pluss_MyRio

The TETRIX PRIME plus myRIO is a kit that introduces students to hands-on engineering in controls and robotics.  Students use it to learn and apply skills in mechanical design, graphical programming, and controls theory so that they can design, prototype, and automate their own assemblies.

The kit includes:

  • Builder’s guide with step-by-step instructions for getting started and building three model assemblies
  • Over 300 mechanical components for building assemblies
  • Motor board to connect all included sensors and actuators with ease
  • 10-cell AA NiMH Battery Pack
  • Battery charger
  • Sensors and actuators: two standard servos, two DC motors, ambient light sensor, gyro sensor, IR rangefinder
  • myRIO

 

Compare

ANALOG DISCOVERY 2

0 out of 5
(0)
National instruments

Analog Discovery 2 transforms any PC into an electrical engineering workstation. This USB-powered device enables students to build and test analog and digital circuits in any environment with the functionality of traditional benchtop instruments.

SKU: NI_ANALOG_DISCOVERY_2
Availability:

Out of stock

Compare
PASCO CASTLE Kit

CASTLE Kit

0 out of 5
(0)
PASCO scientific

Kit for two students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

SKU: EM-8624A
Availability:

Out of stock

Compare
PASCO CASTLE Kit

Economy CASTLE Kit

0 out of 5
(0)
PASCO scientific

Kit for eight students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

SKU: EM-8654
Availability:

Out of stock

Compare

NI ELVIS Engineering Lab Workstation

0 out of 5
(0)
National instruments

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a modular engineering educational laboratory platform.

• Seven hardware instruments plus control I/O containing 16 AI, 4 AO, and 40 DIO
• 4-channel, 100 MS/s oscilloscope sample rate with 14-bit resolution and 50 MHz bandwidth
• 16-channel, 100 MS/s logic analyzer/pattern generator
• 16-channel, 1 MS/s analog input with 16-bit resolution
• 40 DIO lines individually programmable as input, output, PWM, or digital protocols

 

SKU: 785578-20

TETRIX PRIME plus myRIO

0 out of 5
(0)
National instruments

The TETRIX PRIME plus myRIO is a kit that introduces students to hands-on engineering in controls and robotics.  Students use it to learn and apply skills in mechanical design, graphical programming, and controls theory so that they can design, prototype, and automate their own assemblies.

The kit includes:

  • Builder’s guide with step-by-step instructions for getting started and building three model assemblies
  • Over 300 mechanical components for building assemblies
  • Motor board to connect all included sensors and actuators with ease
  • 10-cell AA NiMH Battery Pack
  • Battery charger
  • Sensors and actuators: two standard servos, two DC motors, ambient light sensor, gyro sensor, IR rangefinder
  • myRIO

 

SKU: NI_Tetrix_pluss_MyRio

ANALOG DISCOVERY 2

0 out of 5
(0)
National instruments

Analog Discovery 2 transforms any PC into an electrical engineering workstation. This USB-powered device enables students to build and test analog and digital circuits in any environment with the functionality of traditional benchtop instruments.

Availability:

Out of stock

Compare
PASCO CASTLE Kit

CASTLE Kit

0 out of 5
(0)
PASCO scientific

Kit for two students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

Availability:

Out of stock

Compare
PASCO CASTLE Kit

Economy CASTLE Kit

0 out of 5
(0)
PASCO scientific

Kit for eight students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

Availability:

Out of stock

Compare

NI ELVIS Engineering Lab Workstation

0 out of 5
(0)
National instruments

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a modular engineering educational laboratory platform.

• Seven hardware instruments plus control I/O containing 16 AI, 4 AO, and 40 DIO
• 4-channel, 100 MS/s oscilloscope sample rate with 14-bit resolution and 50 MHz bandwidth
• 16-channel, 100 MS/s logic analyzer/pattern generator
• 16-channel, 1 MS/s analog input with 16-bit resolution
• 40 DIO lines individually programmable as input, output, PWM, or digital protocols

 

TETRIX PRIME plus myRIO

0 out of 5
(0)
National instruments

The TETRIX PRIME plus myRIO is a kit that introduces students to hands-on engineering in controls and robotics.  Students use it to learn and apply skills in mechanical design, graphical programming, and controls theory so that they can design, prototype, and automate their own assemblies.

The kit includes:

  • Builder’s guide with step-by-step instructions for getting started and building three model assemblies
  • Over 300 mechanical components for building assemblies
  • Motor board to connect all included sensors and actuators with ease
  • 10-cell AA NiMH Battery Pack
  • Battery charger
  • Sensors and actuators: two standard servos, two DC motors, ambient light sensor, gyro sensor, IR rangefinder
  • myRIO

 

ANALOG DISCOVERY 2

0 out of 5
(0)

Analog Discovery 2 transforms any PC into an electrical engineering workstation. This USB-powered device enables students to build and test analog and digital circuits in any environment with the functionality of traditional benchtop instruments.

PASCO CASTLE Kit

CASTLE Kit

0 out of 5
(0)

Kit for two students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

PASCO CASTLE Kit

Economy CASTLE Kit

0 out of 5
(0)

Kit for eight students. Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena.

NI ELVIS Engineering Lab Workstation

0 out of 5
(0)

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a modular engineering educational laboratory platform.

• Seven hardware instruments plus control I/O containing 16 AI, 4 AO, and 40 DIO
• 4-channel, 100 MS/s oscilloscope sample rate with 14-bit resolution and 50 MHz bandwidth
• 16-channel, 100 MS/s logic analyzer/pattern generator
• 16-channel, 1 MS/s analog input with 16-bit resolution
• 40 DIO lines individually programmable as input, output, PWM, or digital protocols

 

TETRIX PRIME plus myRIO

0 out of 5
(0)

The TETRIX PRIME plus myRIO is a kit that introduces students to hands-on engineering in controls and robotics.  Students use it to learn and apply skills in mechanical design, graphical programming, and controls theory so that they can design, prototype, and automate their own assemblies.

The kit includes:

  • Builder’s guide with step-by-step instructions for getting started and building three model assemblies
  • Over 300 mechanical components for building assemblies
  • Motor board to connect all included sensors and actuators with ease
  • 10-cell AA NiMH Battery Pack
  • Battery charger
  • Sensors and actuators: two standard servos, two DC motors, ambient light sensor, gyro sensor, IR rangefinder
  • myRIO

 

Showing all 5 results

Privacy Policy Settings